|
Air Handling Units Floor Vertical Air Handling are suitable for less floor area than horizontal units. These units are provided with a opening panel at the front of fan section for easy maintenance and serviceability of the unit. This also permits the unit to be alligned against wall corners, thereby saving space. These units used for applications where multiple units are required to aircondition a floor constrained by ceiling heights, duct sizing and floor space. Standard features of the unit
Casing The AHU is constructed on a thick fabricated GSS and aluminium sections. Fan and motor is mounted on a fabricated slide rail. A specially designed motor mounting base plate allows adjustment of the belt tension without disturbing motor alignment. Flexible fire retardant canvas connection is provided at the fan outlet. The coil is placed on sliding channels for ease in service and maintenance. The Drain pan is made of galvanised Steel sheet (GSS) or Stainless Steel and insulated with a closed cell to avoid surface condensation. User Friendly
The fan section is provided with an access door for ease in serviceablity of the fan and motor. user- friendly nylon handles can be operated from both inside and outside the casing.
Fan Standards Centrifugal fans are of double inlet, double width type with forward curved impeller. Fans are AMCA certified for sound and air performance and are statically and dynamically balanced. The whole fan assembly is trim balanced to ISO 1940 & AMCA 204 G2. 5 Standard. Fans are selected based on higher efficiency and lower noise levels. The motor is of TEFC squirrel cage induction type with IP 55 protection and Class 'F' insulation.
|
